Visitors

• Bryan Pajarito “Moment connections in CLT panels” MITACS Globalink, exchange student from France, May – August 2023

• Lennart Fieber: “Long-term testing of CLT panels” MITACS Globalink, exchange student from Germany, May – August 2023

• Hiroyuki Takayabu: “Connections in CLT with self-tapping screws” MITACS Globalink, exchange student from Germany, May – August 2023
• Sivanathan Sivasankar: “Testing of notched CLT panels” MITACS Globalink, exchange student from India, May – August 2022

• Andres Restrepo Ramirez: “Testing of CLT panels under Rolling Shear” MITACS Globalink, exchange student from India, May – August 2022

• Hanupriyan Selvaganapathi: “Testing of CLT brittle failure modes” MITACS Globalink, exchange student from Columbia, May – August 2022

• Jonathan Hoffmann: “Numerical modelling of Timber-Comcrte-Composites” MITACS Globalink, exchange student from Germany, May – August 2021

• Felipe Sgarbosa: “Testing of CLT connections” MITACS Globalink, exchange student from University of São Paulo, May – August 2019

• Luis Estrella Gómez: “Testing of CLT connections” MITACS Globalink, exchange student from University Tecnologico de Monterrey, May – August 2019

• Leandro Cerqueira Santos: “Experimental investigations on reinforced timber elements” MITACS Globalink, exchange student from Universidade Estadual de Feira de Santana, May – August 2017

• Host for visiting researcher: Dr. Mislav Stepinak, University of Zagreb, April 2017

• Host for Sabbatical stay of Prof. Paulina González, University of Santiago, Chile, July 2015 – June 2016

• Host for visiting researcher: Prof. Michael Gershfeld, California State Polytechnic University, April 2016

• Alexander Dyck: “Numerical investigation on timber joints” RISE Program DAAD project CA-EN-1123, exchange student from Karlsruhe Institute of Technology, August – December 2015

• Mariana Ramírez Pérez: “Reliability analysis of CLT connections” MITACS Globalink, exchange student from Assam Engineering College, May – July 2015

• Filipe Cassiano: “Experimental testing of CLT connections” Science Without Borders exchange student, May – August 2015

• Paulo Cassiano: “Experimental testing of CLT connections” Science Without Borders exchange student, May – August 2015

• Thomas Knauer: “Numerical investigation on timber joints” RISE Program DAAD project CA-EN-036, exchange student from Technical University Munich, August – October 2014

• Kuldeep Kaushik: “Wind analysis of tall timber hybrid structures” MITACS Globalink, exchange student from Assam Engineering College, July – October 2014

• Ruthwik Lakshman: “Shear Connections in Cross-Laminated-Timber” RISE Program DAAD project CA-EN-036, exchange student from India National Institute of Technology, August – October 2014

• Manuel Fekter: “Numerical investigation on Timber Contact Joints” RISE Program DAAD project CA-EN-2070, exchange student from Hamburg University of Technology, August – September 2013

• Christoph Paul Schimanski: “Sustainable Disaster Relief Housing” RISE Program DAAD project CA-EN-1567, exchange student from Hamburg University of Technology, September – October 2012

• Katrin Kenzlers: “Determination of Weibull parameters of Canadian wood species” RISE Program DAAD project CA-EN-1567, exchange student from Clausthal University of Technology, August – October 2012